Installation Procedure
WARNING: This page is about a different car, the 2004 Saturn Ion Red Line, 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
- Position the rear run channel (1) in the front door.
- Install the window rear channel bolt.
Tighten: Tighten the lower window channel bolt to 6 N.m (53 lb in).
- Install the front door window. Refer to Window Replacement - Front Door .
- Install the front door water deflector. Refer to Water Deflector Replacement - Front Door .
- Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
NOTE:
Refer to Fastener Notice in Cautions and Notices.