Installation Procedure

Install the console and slide the retaining tab into the slot.

Fig 1: View Of Overhead Console
Courtesy of GENERAL MOTORS CORP.
Connect the electrical connectors.

Fig 2: View Of Electrical Connections
Courtesy of GENERAL MOTORS CORP.
Push up on the rear of the console to engage the retaining clips.

Fig 3: View Of Overhead Console Retaining Clips
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 4: View Of Display Screen

Courtesy of GENERAL MOTORS CORP.

Install the fasteners and fold up the display screen.
Tighten the fasteners to 2 N.m (18 lb in).