Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2005 >> Vue Base, 2.2 D, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Controls - 3.5L (L66) Introduction) >> Repair Instructions >> Fuel Rail Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
  2. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical.
  3. Disconnect the fuel injector electrical connectors.
  4. Remove the bolts.
  5. Remove the fuel rail and injectors from the manifold as an assembly.
    Fig 1: Exploded View Of Fuel Rail Assembly
    GM1237804Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals