Hood Latch Replacement

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Hood Latch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Preliminary Procedures: Remove the radiator support sight shield. Refer to Radiator Support Sight Shield Replacement .
1	Bolt, Hood Latch (Qty: 3) Tighten: 10 N.m (89 lb in)
2	Latch, Hood Tip: Disconnect the release cable.