Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2005 >> Relay AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Battery Tray Bolts And Removing Battery Tray
    GM1239101Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Position the battery bracket and tighten the bolts.

    Tighten:  Tighten the battery tray bracket bolts to 16 N.m (12 lb ft).

    2. Fig 2: Disconnecting Battery Negative Cable From Battery
    GM1239095Courtesy of GENERAL MOTORS CORP.
  2. Install the battery and battery tray cover. Refer to Battery Replacement .
scientia non olet · About Mike's Workshop Manuals