Installation Procedure
WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the assist handle to the vehicle.
- Install the assist handle retaining bolts.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
- Install the body pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement .
NOTE:
Refer to Fastener Notice
.