Installation Procedure

Fig 1: Removing & Installing Front Transaxle Mount

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the transaxle mount into the vehicle and tighten the bolts.
Tighten: Tighten the transaxle mounts (front and rear)-to-transaxle bolts to 90 N.m (66 lb ft).

Fig 2: Removing/Installing Front Transaxle Mount Through Bolt

Courtesy of GENERAL MOTORS CORP.

Install the transaxle mount through bolt.
Tighten: Tighten the transaxle mount (rear) through bolt to 55 N.m (41 lb ft).
Reposition the cooling fan for installation.
Lower the vehicle from the hoist.

Fig 3: Removing & Installing Fan Shroud-To-Radiator Bolts

Courtesy of GENERAL MOTORS CORP.

Install the engine cooling fan attachment bolts.
Tighten: Tighten the engine cooling fan attachment bolts to 4 N.m (35 lb in).