Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Wipers System And Washers System) >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Washer Pump
    GM892547Courtesy of GENERAL MOTORS CORP.
  1. Install the washer pump to the washer solvent container pressing into place until fully seated.
  2. Connect the fluid hose from the washer pump.
  3. Connect the electrical connector to the washer pump.
  4. Fill the washer solvent container with new washer solvent.
  5. Inspect the wiper/washer system for proper operation.
  6. Pull back the drivers side wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front in Body Front End.