Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Controls - 2.2L (L61) (Introduction)) >> Repair Instructions >> Ignition Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition OFF.
  2. Disconnect the electronic ignition (EI) module harness connector.
  3. Remove the EI module attachment screws and the EI module.
  4. Fig 1: Removing & Installing Ignition Control Module
    GM896789Courtesy of GENERAL MOTORS CORP.