Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Controls - 2.2L (L61) (Introduction)) >> Repair Instructions >> Fuel Sender Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the fuel level sender onto the new fuel pump. Refer to Fuel Level Sensor Replacement .
  2. Install the new fuel pump with the level sender and the new fuel pump-to-tank seal. Ensure the orientation tabs are aligned.
    3. Fig 1: Removing & Installing Fuel Pump Module
    GM892958Courtesy of GENERAL MOTORS CORP.
  3. Use the J 43827  to install the fuel pump lock ring. See Special Tools and Equipment .
    4. Fig 2: Removing & Installing Fuel Pump Module Lock Ring
    GM892359Courtesy of GENERAL MOTORS CORP.
  4. Connect the fuel lines and wiring harness.
  5. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About Mike's Workshop Manuals