Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Engine Controls - 2.2L (L61) (Introduction)) >> Repair Instructions >> Accelerator Controls Pedal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the accelerator pedal into the vehicle and tighten the fasteners. Tighten:  Tighten the accelerator pedal-to-front of dash to 10 N.m (89 lb in).
    2. Fig 1: Removing & Installing Accelerator Pedal
    GM892917Courtesy of GENERAL MOTORS CORP.
  2. Install the accelerator pedal cable.
    3. Fig 2: Connecting Accelerator Cable To Accelerator Pedal
    GM892954Courtesy of GENERAL MOTORS CORP.
  3. Install the lower I/P hush panel.
    4. Fig 3: Removing & Installing Lower Instrument Panel Hush Panel
    GM896490Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals