Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2005 >> L300 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Introduction >> Repair Instructions >> Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Mass Air Flow Sensor
    GM897187Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Disconnect the mass air flow (MAF) sensor harness.
  3. Remove the hose clamps from each end of the MAF sensor and remove the MAF sensor.
scientia non olet · About Mike's Workshop Manuals