Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2005 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 113 (Fixed And MOVEABLE Windows) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
    2. Fig 1: Locating Rear Window Defogger Electrical Connector
    GM401856Courtesy of GENERAL MOTORS CORP.
  2. Connect the rear window defogger electrical connectors.
    3. Fig 2: Rear Window Radio Antenna Connector
    GM181953Courtesy of GENERAL MOTORS CORP.
  3. Install the rear window radio antenna connector.
  4. Verify the radio has reception.
  5. Install the rear upper garnish moldings. Refer to Garnish Molding Replacement - Lock Pillar Upper .
  6. Install the rear roof rail appliques. Refer to Roof Weld Joint Reveal Molding Replacement - Rear (Coupe) or Roof Weld Joint Reveal Molding Replacement - Rear (Sedan) .
  7. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About Mike's Workshop Manuals