Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2004 >> Vue Red Line, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (Engine Controls - 2.2L (L61) Introduction) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition OFF.
  2. Disconnect the IAT sensor harness connector.
  3. Remove the IAT sensor by pulling it out of the air induction tube.
    Fig 1: View Of Intake Air Temperature (IAT) Sensor
    GM946983Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals