Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2004 >> Vue Red Line, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) -- 3.5L (L66) >> Repair Instructions >> Crankshaft Position (CKP) Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Crankshaft (CKP) Sensor & Harness
    GM897067Courtesy of GENERAL MOTORS CORP.
  1. Install the crank sensor and harness.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the timing belt guide (703).

    Tighten:  Tighten the timing belt fasteners to 10 N.m (88 lb in).

  3. Install the front cover. Refer to Timing Belt Cover Replacement in Engine Mechanical - 3.5L.
  4. Perform the idle learn procedure. Refer toIdle Learn Procedure  in Engine Controls - 3.5L (L66).
scientia non olet · About Mike's Workshop Manuals