Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2004 >> Vue Red Line, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers System And Washers System >> Repair Instructions >> Wiper Arm Replacement >> Installation Procedure

Installation Procedure

  1. Position wiper blade assembly at tick mark in lower portion of windshield blackout strip on driver side of vehicle.
  2. Position wiper blade assembly at tick mark in windshield pillar portion of windshield blackout strip on passenger side of vehicle.
    3. Fig 1: Removing/Installing Wiper Arm
    GM929320Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the wiper arm nut.

    Tighten:  Tighten the nut to 27 N.m (20 lb ft).

  4. Operate the windshield wipers and inspect for proper operation.
scientia non olet · About Mike's Workshop Manuals