Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2004 >> L300 4D Sedan, 2.2 F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L (L61) (Introduction) >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Turn the ignition OFF.
  2. Disconnect the IAT sensor harness connector.
  3. Remove the IAT sensor by pulling it out of the air induction tube.
    4. Fig 1: Removing & Installing Intake Air Temperature Sensor
    GM870620Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals