Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2004 >> L300 4D Sedan, 2.2 F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L (L61) (Introduction) >> Repair Instructions >> Fuel Pressure Regulator Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Do not allow smoking or the use of open flames in the area where work on the fuel or EVAP system is taking place. Anytime work is being done on the fuel system, disconnect the negative battery cable, except for those tests where battery voltage is required.
    CAUTION: Whenever fuel line fittings are loosened or removed, wrap a shop cloth around the fitting and have an approved container available to collect any fuel.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
    2. Fig 1: Proper Connection Of Pressure Adapter & Gage Bar Set To Fuel Rail
    GM893318Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the vacuum line.
  3. Remove the retaining bolts.
  4. Remove the fuel pressure regulator.
scientia non olet · About Mike's Workshop Manuals