Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2004 >> L300 4D Sedan, 2.2 F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L (L61) (Introduction) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the mass airflow (MAF) sensor electrical connector.
    2. Fig 1: Locating Mass Airflow Sensor Electrical Connector
    GM894283Courtesy of GENERAL MOTORS CORP.
  2. Unsnap the EVAP purge valve assembly and secure out of the way of the air cleaner assembly.
    3. Fig 2: Removing & Installing EVAP Canister Purge Solenoid Valve
    GM894280Courtesy of GENERAL MOTORS CORP.
  3. Remove the air cleaner lid:
    1. Loosen the hose clamp at the throttle body.
    2. Slide off the flexible MAF hose-to-throttle body hose.
    3. Unclamp the air cleaner lid.
    4. Remove the air cleaner lid, MAF sensor, and hose as an assembly.
    4. Fig 3: Removing/Installing Intake Hose Assembly
    GM894285Courtesy of GENERAL MOTORS CORP.
  4. Remove the air cleaner from the air box.
  5. Remove the air box mount bolt.
  6. Remove the air box.
    7. Fig 4: Removing Air Cleaner Assembly
    GM895973Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals