Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls (Introduction)) >> Repair Instructions >> Fuel Hose/Pipes Replacement - Engine Compartment >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Saturn Ion 3, 2004 Saturn Ion 2, and 2004 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
  2. Disconnect the engine fuel feed pipe from the chassis fuel flex hose. Refer to Quick Connect Fitting(s) Service (Metal Collar) .
    3. Fig 1: Connecting/Disconnecting Fuel Feed Pipe
    GM854303Courtesy of GENERAL MOTORS CORP.
  3. Use a back up wrench on the fuel rail and disconnect the fuel feed pipe.
  4. Remove the fuel feed pipe fastener located on the engine.
  5. Remove the engine fuel feed pipe.
    6. Fig 2: View Of Fuel Feed Pipe Fastener
    GM854304Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals