Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Lighting Systems) >> Repair Instructions >> High Mounted Stop Lamp Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion Red Line, 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: View Of Center High Mounted Stop Lamp Retainer Screws
    GM856553Courtesy of GENERAL MOTORS CORP.
  1. Install the center high-mounted stop lamp with screws.

    Tighten:  Tighten the center high-mounted stop lamp screws to 2.5 N.m (19 lb in).

  2. Connect the electrical connector to the center high-mounted stop lamp.
  3. Install the cover by placing the tabs in the slots. Gently press the cover into place.
    4. Fig 2: View Of High-Mounted Stop Lamp Cover
    GM856552Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals