Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 200 (Front Suspension System) >> Repair Instructions >> Front Lower Control Arm Bushing Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Pontiac G5 Pursuit, 2007 Pontiac G5, and 2007 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the lower control arm. Refer to Lower Control Arm Replacement .
  3. Wrap the control arm with a shop towel and place it in a vise.
  4. Fig 1: Removing Control Arm Bushing
    GM851706Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Note the depth and orientation of the old bushing before removal.
  5. Using the J 41211  , pull the control arm bushing through the control arm. See Special Tools .
  6. Disassemble the tools and remove the bushing.