Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers System And Washers System >> Repair Instructions >> Washer Pump Replacement >> Installation Procedure

Installation Procedure

  1. Position the seal to the washer solvent container, pressing in until fully seated.
  2. Position the washer pump to the washer solvent container pressing, in until fully seated.
  3. Connect the washer pump electrical connector.
  4. Connect the washer pump hose.
  5. Install the front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  6. Fill the washer solvent container with washer solvent.
    7. Fig 1: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor
    GM815208Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals