Conditions For Running DTC

DTCs P0105, P0107, P0108, P0112, P0113, P0117, P0118, P0122, P0123, P0125, P0128, P0201-P0204, P0300, P0301-P0304, P0336, P0410, P0440, P0442, P0446, P0452, P0453, P0506, P0507, P0601, P0602, P1441, or P1621 are not set.
ECT sensor parameter is more than 158°F (70°C).
Engine speed parameter is 1000-3500 RPM.
Ignition 1 signal parameter is more than 10 volts.
Engine run time parameter is more than 200 seconds.
Loop Status parameter is closed.
TP angle parameter is 5-40 percent.
EVAP purge solenoid DC is more than 35 percent.
Fuel level sensor parameter is more than 10 percent.
MAP sensor parameter is 10-104 kPa.
Conditions are met for 60 seconds.