Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn Ion 3, 2003 Saturn Ion 2, and 2003 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Amplifier Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connectors.

Fig 2: View Of Amplifier

Courtesy of GENERAL MOTORS CORP.

Insert the amplifier rear tabs in the window shelf.
Push up to engage the amplifier bracket forward clip.
Raise the rear seat backs.
Press down over the latch locations to ensure that the latches engage.
Pull up on the seat backs to ensure that the seat back latches are fully engaged.
Verify that the seat belts operate properly.