Control Lever Boot Assembly (On-Vehicle): Removal

Disable SIR system.
Remove console. Refer to CONSOLE .
Unclip the boot assembly from the plastic retainer in the rear of the shifter control assembly by pulling rearward and upward on the boot.

Fig 1: Unclip Boot Assembly From Rear Of Shifter Control Assembly
Courtesy of GENERAL MOTORS CORP.
Unclip the boot assembly from the plastic retainer in the front of the shifter control assembly and remove the boot.

Fig 2: Unclip The Boot Assembly From The Plastic Retainer In The Front Of The Shifter Control Assembly
Courtesy of GENERAL MOTORS CORP.