Arming Sensor/Dual Pole Arming Sensor: Installation
WARNING: This page is about a different car, the 1995 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Install arming sensor into vehicle with arrow pointing toward front of vehicle. Install arming sensor retaining bolts and tighten to 106 INCH Lbs. (12 N.m). To complete installation, reverse removal procedure.
- Reactivate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG warning light to ensure system is functioning properly. See SYSTEM OPERATION CHECK.