Arming Sensor/Dual Pole Arming Sensor: Installation
WARNING: This page is about a different car, the 1995 Pontiac Grand Am, 1995 Oldsmobile Achieva, and 1995 Buick Skylark. However, it is still accessible from the selected car via links, so may be relevant.
- Install arming sensor with arrow pointing toward front of vehicle. Install sensor mounting bolt, and tighten to 80 INCH Lbs. (9 N.m). To complete installation, reverse removal procedure.
- Reactivate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM. Check AIR BAG warning light to ensure system is functioning properly. See SYSTEM OPERATION CHECK.