Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2011 >> 9-4X 3.0i, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Management And Fuel System, V6 >> Fault diagnosis, fault codes >> DTC P0856: Traction Control Torque Request Circuit >> Circuit/System Verification

Circuit/System Verification

  1. Observe the Freeze Frame/Failure Records with a scan tool.
  2. Clear the DTCs with a scan tool.
  3. Ignition OFF for 30 seconds.
  4. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
  5. If DTC P0856 failed this ignition, replace the EBCM.
scientia non olet · About Mike's Workshop Manuals