Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2011 >> 9-3X Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Driver Information, Main Instrument Unit And SID) >> Specifications >> Test readings, control module connections, main instrument unit >> Control module connection

Control module connection

WARNING: This page is about a different car, the 2009 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Control Module Connector Pins
G05056673Courtesy of SAAB-SCANIA OF AMERICA, INC.
TEST REFERENCE CHART

Pin Component / Function In/Out Test conditions Across Test reading Comments
1 Check Engine lamp In Ignition ON 1-4 11.5-12 V  
2 No connection          
3 Battery voltage +30 In Ignition ON 3-4 B+  
4 Ground In Ignition ON 4-B+ B+  
5 No connection          
6 No connection          
7 I-bus In/Out Ignition ON
Connect 86 11 857 TEST LAMP, RED/GREEN 
7-4 The test lamp should flash All units connected to the I-bus transmit signals.
8 I-bus In/Out Ignition ON
Connect 86 11 857 TEST LAMP, RED/GREEN 
8-4 The test lamp should flash All units connected to the I-bus transmit signals.
9-12 No connection