Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2011 >> 9-3X Standard >> Repair and Diagnosis >> Electrical >> Body Electrical >> General Electrical >> Repair Instructions - Control Modules >> Headlamp control module (682) >> To remove

To remove

  1. If replacing the control module:  Perform diagnostic procedures before control module removal .
  2. Turn the ignition key to the LOCK position.
  3. Remove the headlamp. See HEADLAMPS .
  4. Turn the headlamp upside down and remove the screws (A) of the AFL control module.
    Fig 1: Identifying AFL Control Module Screws
    G05571172Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals