Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2009 >> 9-3 2.0T, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Horns >> Lighting And Signaling Systems >> Repair Instructions - Control Modules >> Headlamp control module (682) >> To remove

To remove

  1. If replacing the control module:  Perform Diagnostic procedures before control module removal. 
  2. Turn the ignition key to the LOCK position.
  3. Remove the headlamp .
  4. Turn the headlamp upside down and remove the screws (A) of the AFL control module.
    Fig 1: Identifying AFL Control Module Screws
    G05571172Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals