Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2007 >> 9-7X 4.2i >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.2L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Rail Assembly Replacement >> Disassembly Procedure

Disassembly Procedure

  1. Remove the fuel injector wire harness (2) from the fuel rail (1).
    Fig 1: Identifying Fuel Injector Wire Harness (2) & Fuel Rail (1)
    GM1482972Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel injectors (4) from the fuel rail (4). Refer to Fuel Injector Replacement .
scientia non olet · About Mike's Workshop Manuals