Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2007 >> 9-3 2.0T, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (TRIONIC T7 Fuel Control System) >> Repair Instructions >> Main Relay >> To remove

To remove

WARNING: This page is about a different car, the 2007 Saab 9-5 and 2006 Saab 9-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the pedal bracket cover by undoing the 3 screws. Tilt down the cover and carefully pull it out. Pay attention to the cable for the diagnostic tool data link connector and the lighting.
    Fig 1: Illustration For Step 1
    G05035101Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Undo the screw on the relay box.
    Fig 2: Illustration For Step 2
    G05035102Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Tilt down the relay holder.
  4. Carefully open the catch and remove the relay.
Fig 3: Identifying Relay Holder
G05035161Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals