Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2007 >> 9-3 2.0T, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (TRIONIC T7 Fuel Control System) >> Repair Instructions >> Ignition Discharge Module >> To fit

To fit

WARNING: This page is about a different car, the 2007 Saab 9-5 and 2006 Saab 9-5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Illustration For Step 1-3
G05035194Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Apply Krytox (part no. 30 19 312) to the rubber seals and fit the ignition discharge module.
  2. Fit the 4 screws.

    Tightening torque 11 Nm (8.1 lbf ft) 

  3. Spray the 10-pin ignition discharge module connector with Kontakt 61 (part no. 30 04 520). Plug in the connector.
scientia non olet · About Mike's Workshop Manuals