Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2007 >> 9-3 2.0T, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (TRIONIC T7 Fuel Control System) >> Repair Instructions >> EVAP Pressure Sensor >> To remove

To remove

WARNING: This page is about a different car, the 2007 Saab 9-5 and 2006 Saab 9-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel tank, see ADJUSTMENT/REPLACEMENT, FUEL TANK .
  2. Blow clean around the pressure sensor.
    Fig 1: Illustration For Step 3-4
    G05035185Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Undo the screw on the pressure sensor.
  4. Carefully remove the pressure sensor.
scientia non olet · About Mike's Workshop Manuals