Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 5.3L - Introduction) >> Repair Instructions >> Fuel Rail Crossover Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
    2. Fig 1: Identifying Positive Crankcase Ventilation (PCV) Crossover Pipe
    GM1485985Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel rail crossover pipe retaining clip screws (1) and retainer clips (2).
  3. Remove the crossover pipe (3) from the left and right hand fuel rails.
  4. Remove and discard the crossover fuel pipe O-rings (4).
scientia non olet · About Mike's Workshop Manuals