Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Body & Frame >> Frames, Subframes & Crossmembers >> Frame And Underbody >> Repair Instructions >> Radiator Support Shield Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Radiator Support Shield
    GM769533Courtesy of GENERAL MOTORS CORP.
  1. Install the radiator support shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the radiator support shield mounting nuts and bolts.

    Tighten:  Tighten the radiator support shield mounting nuts to 17 N.m (13 lb ft).

  3. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals