Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2005 >> 9-3 Linear, 2D Convertible, Standard >> Repair and Diagnosis >> Steering >> Steering Linkage >> Adjustment - Replacement >> Steering angle sensor, changing (EHPS) >> To remove

To remove

  1. Remove the cable kit connector (1). Detach and pull away.
    Fig 1: Removing Steering Angle Sensor - Changing (EHPS)
    G03836308Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Remove the steering angle sensor (2). Pull the steering angle sensor from the steering gear housing.
  3. Clean the sealing surface.

scientia non olet · About Mike's Workshop Manuals