Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2005 >> 9-3 Linear, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Lighting And Signaling Systems) >> Adjustment - Replacement >> Load angle sensor, rear >> To remove

To remove

WARNING: This page is about a different car, the 2004 Saab 9-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the car.
  2. Unplug the sensor.
    Fig 1: Illustration For Steps 2 To 4
    G03741457Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Loosen the upper link arm ball joint.
  4. Unscrew the level sensor and remove it with the bracket.
  5. Remove the sensor from the bracket by undoing the screws.
    Fig 2: Removing Load Angle Sensor (Rear)
    G03741458Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals