Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2005 >> 9-3 Linear, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Lighting And Signaling Systems) >> Adjustment - Replacement >> Load angle sensor, front >> To remove

To remove

WARNING: This page is about a different car, the 2004 Saab 9-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the car.
  2. Remove the belt cover.
  3. Unplug the sensor.
    Fig 1: Illustration For Steps 3 To 5
    G03741453Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Loosen the upper link arm ball joint.
  5. Remove the bracket with sensor by undoing the screws.
  6. Remove the sensor from the bracket by undoing the screws.
    Fig 2: Removing Load Angle Sensor (Front)
    G03741454Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals