Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2005 >> 9-3 Linear, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Lighting And Signaling Systems) >> Adjustment - Replacement >> Load angle sensor, front >> To fit

To fit

WARNING: This page is about a different car, the 2004 Saab 9-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit the sensor to the bracket by screwing in the screws.
    Fig 1: Fitting Load Angle Sensor (Front)
    G03741455Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Fit the screws and bracket with level sensor.
    Fig 2: Illustration For Steps 2 To 4
    G03741456Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Fit the link arm ball joint.
  4. Plug in the connector.
  5. Fit the belt cover.
  6. Calibrate both AHL control modules, see XENON LIGHTING SYSTEM, CALIBRATION  .
scientia non olet · About Mike's Workshop Manuals