Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2005 >> 9-3 Linear, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (TRIONIC T7 Fuel Control System) >> Adjustment - Replacement >> EVAP pressure sensor >> To remove

To remove

WARNING: This page is about a different car, the 2004 Saab 9-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel tank, see ADJUSTMENT/REPLACEMENT , Fuel tank .
  2. Blow clean around the pressure sensor.
    Fig 1: Illustration For Steps 3 To 4
    G03732870Courtesy of SAAB-SCANIA OF AMERICA, INC.
  3. Undo the screw on the pressure sensor.
  4. Carefully remove the pressure sensor.
scientia non olet · About Mike's Workshop Manuals