Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2005 >> 9-3 Linear, 2D Convertible, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Protection >> Adjustment / Replacement >> Body Control Module (BCM) (707) >> To fit

To fit

  1. Fit the control module.
    Fig 1: Illustration For Step - 1-2
    G03825739Courtesy of SAAB-SCANIA OF AMERICA, INC.
    IMPORTANT: Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to CONNECTORS, HANDLING AND INSPECTION  .
  2. Plug in the connector.
  3. Fit the lower section of the dashboard
    Fig 2: Illustration For Step - 3
    G03825740Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. If the control module has been replaced:  Carry out PROCEDURES AFTER CHANGING A CONTROL MODULE  .
scientia non olet · About Mike's Workshop Manuals