Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2004 >> 9-5 Linear, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Gear Selector Mechanism (Automatic)) >> Adjustment - Replacement >> WINTER button >> To remove

To remove

WARNING: This page is about a different variant/trim than selected.
Fig 1: Illustration For Step 3-5
G03743402Courtesy of SAAB-SCANIA OF AMERICA, INC.
  1. Remove the edging around the indication display.

    Remove the upper part of the center console, see INTERIOR EQUIPMENT .

  2. Snip the cable tie.
  3. Press the WINTER-button out of the indication display.
  4. Move the protective casing from the soldering joint on the middle lead and unsolder to remove the leads.
    NOTE: Protect the indication display when soldering.
scientia non olet · About Mike's Workshop Manuals