Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2004 >> 9-3 Linear, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Theft Protection) >> Fault Diagnosis, general >> Procedure after changing the control module >> SPS programming

SPS programming

WARNING: This page is about a different car, the 2005 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Connect Tech2 and use TIS 2000 to check whether the control module requires programming. Go to the "SPS  " menu, select "Read control module data" and follow the instructions. This is done so that the control module receives the latest available software and is also adapted to the car variant and market.

scientia non olet · About Mike's Workshop Manuals