To remove

Retract the soft top.
Remove The upper windscreen frame trim, CV and A PILLAR TRIM, CV
Pull out the windscreen frame seal from the A pillar seal mount. Start at the bottom edge.

Fig 1: Illustration For Step 3
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Remove the nuts from the windscreen frame seal.

Fig 2: Illustration For Step 4
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Undo the screws from the A pillar trim moulding. Remove the moulding from the A pillar.

Fig 3: Illustration For Step 5
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Lift up the moulding from the corner of the windscreen frame.
Pull out the seal from the upper seal mount.

Fig 4: Illustration For Step 6
Courtesy of SAAB-SCANIA OF AMERICA, INC.
Pull out the trim moulding from the corner of the rubber moulding. Pull away the thin rubber moulding from the inside of the trim moulding.

Fig 5: Illustration For Step 7
Courtesy of SAAB-SCANIA OF AMERICA, INC.