Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2003 >> 9-3 Vector, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Bus And Diagnostics Communication) >> Fault Diagnosis General >> Tech 2 Menu Structure >> Changing Car Configuration

Changing Car Configuration

WARNING: This page is about a different car, the 2002 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

If a new control module connected to a bus is installed in the car, the list will be appended automatically.

If a control module connected to a bus, such as the CD changer, is removed from the car, the list can be reset to zero with a command under "All systems/Read/Clear Configuration" or "DICE/Read/Clear Configuration".

Fig 1: Tech 2 Scan Tool Display - Bus Configuration
G03529686Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals