Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Saab >> 2003 >> 9-3 Vector, Standard >> Repair and Diagnosis >> Engine Performance >> System >> TRIONIC T8 Fuel Control System (Late; 9440) >> Adjustment/Replacement >> Power steering fluid pressure sensor (739) >> To remove

To remove

  1. Cut off the cable tie securing the sensor connector.
    Fig 1: Illustration For Steps 1-3
    G03603933Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Unplug the sensor connector.
  3. Carefully remove the pressure sensor as it contains loose parts.
scientia non olet · About Mike's Workshop Manuals