Removal - Rear (V6)

WARNING: This page is about a different car, the 2002 Saab 9-5, 2002 Saab 9-3, 2001 Saab 9-5, and 2001 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine cover.
Unplug the connector to the pressure sensor on the intake manifold. See Fig 1 .
Remove the ignition discharge module. See Fig 2 .
Unplug the ignition discharge module connector.

Fig 1: Detaching Pressure Sensor from Intake Manifold (V6)

Courtesy of SAAB-SCANIA OF AMERICA, INC.

Fig 2: Removing Rear Ignition Discharge Module (V6)

Courtesy of SAAB-SCANIA OF AMERICA, INC.